T28 Twin Fan 8 Blade
NEW! SEASON 2021-22 LAUNCH – AVAILABLE NOW
T28 Twin Fan – 2×4 Blade Heat Powered Stove Fan
The T28 twin fan 8 blade stove fan is a new fans to the market; at a height of just 198mm and width of 180mm. Like all of our fans, the T28 fan speed automatically varies with the temperature of the stove. This fan provides a dual max speed of 1300 RPM.
Note: Must be placed on top of the stove away from the flue pipe by a recommended 4″ +.
Out of stock
T28 Twin Fan 8 Blade – 2 Stove Fans with 2×4 Blades – Double Heat Powered Stove Fan
The T28 Twin Fan 8 Blade is a combined double stove fan.
The T28 is a combined twin fan and twin bladed stove fan which is unique to the market; at a height of just 198mm and width of 180mm. It’s sleek and slender design makes this fan ideal for all rooms. Like all of our fans, the T28 fan speed automatically varies with the temperature of the stove. This fan provides a dual max speed of 1300 RPM.
What is a T28 Twin Fan 8 Blade Stove Fan?
A stove fan is designed to equally distribute warm air across the room created by a gas or wood burning stove. It has a peltier module that acts as a generator to power the stove fan’s discreet motor. Our stove fans only use heat from the stove so is completely self-powered. By using a stove fan this will result in lower fuel costs and reduced emissions. The stove fan will begin to operate when the surface temperature reaches 50°C. Because of the low starting temperature, our stove fan can be used on gas stoves as well as wood burning stoves. Using a stove fan is the most economical way to effectively circulate warm air. It uses no batteries so can be used where there is no electricity.
There is a safety strip on the base of the fan which is designed to gently lift the base of the fan to prevent it from overheating and damaging the motor. The safety strip will then lower the fan back when the stove decreases to the maximum operating temperature.
Note: Must be placed on top of the stove away from the flue pipe at a minimum distance of 4″.
Like this fan? Why not check out our single short powerful 4 blade stove fan, The 524 is a single rounded design? Click Here
- 1300 RPM Max (Average 1184 RPM)
- Height 198mm, Width 180mm
- Optimum burn (300°C) ft/min (CFM) 340
- Increase the efficiency of your stove by up to 33%
- Circulates warm air over large areas
- • Fully heat powered
- 50°C low starting temperature
- Fan speed automatically varies with temperature
- Very quiet operation
- Constructed with anodised aluminium
Barcode number – 5060512530353